Installed in our dedicated climate-controlled PPF bay. Two-day full-body installation, by appointment.
We only take a limited number of full PPF installations per week to ensure each vehicle receives the level of precision and attention it deserves.
price: From AED 10,000
Dubai’s roads expose vehicles to extreme heat, UV radiation, fine dust, and constant stone impact — all of which will inevitably degrade factory paintwork over time.
Once the clear coat is damaged, a respray on a high-value car can run into tens of thousands of dirhams, and your vehicle will never carry factory paintwork again.
We install STEK and Hexis year-round, and XPEL when authorised supply allows — three brands we’ve stayed with for their finish and low re-do rate.
Quality drifts. Manufacturing changes, supply chains shift, quality varies batch to batch. That’s why we stay close to the technicians applying them and the customers living with them — and we adjust our PPF brand lineup when the evidence says to.
We’re only as good as our recent job.
Four films, each chosen for performance and sourced directly through manufacturer-authorised channels.
Thickness: 8 mil (~203 µm)
Top coat: Hydrophobic + self-healing
Warranty: 10 years, clear film
From: AED 10,000
Gloss or matte options.
Thickness: 8 mil (~203 µm)
Top coat: Nano-ceramic-infused, hydrophobic
Warranty: 12 years, clear film
From: AED 12,500
Orange-peel-free optical clarity.
Thickness: 8 mil (~200 µm)
Top coat: Self-healing + stain-resistant
Warranty: 10 years
From: AED 13,999
Outstanding UV performance for the UAE climate.
Thickness: ~10 mil (244 µm)
Top coat: Elastomeric self-healing
Warranty: 10 years, transferable
From: AED 18,000
Warranty transfers if you sell the car.
Grey-market PPF — film sold outside authorised distribution — has circulated in Dubai. We only source through manufacturer-authorised channels, so every film we install is genuine, within manufacturer shelf life, warranty-registered, and traceable.
If you’ve been quoted a premium-brand film at a price that looks too low, ask for the warranty registration. That’s the cleanest single test.
Platinum One Auto is an officially listed STEK installer, verified on the STEK global installer network. Find us on the STEK installer directory →
Recent full-body PPF installations from our climate-controlled bay.
Porsche 997 — full-body PPF, two-day install in our climate-controlled bay
BYD Shark — STEK FORCE Shield matte, 10-year manufacturer warranty
Choosing the right PPF installer is just as important as choosing the film itself. Dust, humidity and a rushed surface prep are the three biggest causes of bubbles, edge lift and early delamination — none of which are the film’s fault.
That’s why every PPF job runs through our dedicated, climate-controlled PPF installation bay — separated from the rest of the workshop.
No brake dust. No overspray. No compromise. Every installation begins with detailed surface preparation to ensure perfect adhesion and clean edge alignment, and every film is applied with precision-fit accuracy for a seamless, nearly invisible finish.
We focus on consistency, quality control, and long-term performance — not volume — which is why we only take on a limited number of vehicles per week.
Precision-installed protection designed for real-world driving.
A full-body PPF installation shields every painted surface from stone chips, swirl marks, UV exposure, and environmental damage — while remaining nearly invisible. Available in any of our four films — pick the one that matches your budget, warranty preference, and how long you plan to keep the car.
Ideal for new and high-value cars, and long-term ownership — particularly owners who plan to sell or trade the car and want to hand it over with original factory paintwork intact.
This package focuses on the most vulnerable panels:
Headlight film is available in a range of tints — from light grey to deep smoke — for those looking to combine protection with a subtle styling upgrade.
A cost-effective way to prevent visible damage from daily driving without wrapping the entire vehicle.
Colour-change PPF (including Tinybot Lumina reflective films), satin/matte finishes, and full vinyl wraps sit in our Performance & Styling cluster — protective PPF and styling films are different jobs with different positioning. See our Vinyl Wrapping page →
Every full-body installation includes a 10-day return inspection — the car comes back to the bay so we can check every panel once the film has fully cured and bonded to the paint. After that, we provide aftercare guidance to keep the film performing over time.
Lower-quality films can:
They also lack the self-healing technology that allows minor scratches and surface marks to disappear on their own when the film warms up — whether from sunlight, engine heat or a warm rinse.
Protect it once — or pay to repair it later.
Many clients combine PPF with Ceramic Coating, Vehicle Styling, or Performance & Styling upgrades to protect both factory paint and custom enhancements over time.
Just got the PPF of my car done and I’m really impressed with the results. The quality of work is excellent — clean finish, precise application, and overall very well done. Big shoutout to the team a…
Alvin TutingI took my 2007 Mitsubishi Pajero to Platinum One Auto after struggling with issues that other garages had overlooked. From the start, the team not only fixed the problem but also involved me in the pr…
Louis GarrattAmazing service and repairs on my Audi S7 at Platinum 1 auto. The guys picked a few 'bad repairs' that had been done before I bought the car, and gave me the piece of mind that they had fixed them. Th…
AlanI would have to say the work done in this workshop is really professional. The people were very cooperative and helpful. I went in there using their free diagnostic offer & after a thorough diagnosti…
Darnelldc CoelhoStarted taking my Audi Q7 here after some bad experiences elsewhere and they guys have been great. Know what they're doing and they don't change parts just to make more money. Trust worthy and profess…
Ray GilmourThey serve different purposes. PPF provides physical protection — it absorbs stone chips, rock impacts and deep scratches that would otherwise reach the paint.
Ceramic coating enhances gloss, makes the surface more hydrophobic, and makes the car easier to wash — but it won't stop a stone chip.
The two are designed to be layered: PPF first, ceramic coating on top. For maximum protection and easiest long-term care, we often recommend combining them.
If you want complete peace of mind, full-body PPF is the best option. Partial coverage protects high-impact areas, but leaves other panels exposed.
Full-body PPF ensures consistent protection across the entire vehicle, preserving both appearance and resale value.
Ceramic coating and PPF do not hide defects — the surface must be corrected first.
That’s why we perform multi-stage polishing and preparation before any application to ensure a flawless, glossy finish that lasts.
We install four films, each chosen for performance under heat and UV.
STEK FORCE Shield is our entry option — 8-mil with a hydrophobic, self-healing top coat and a 10-year warranty on clear film, available in gloss or matte.
STEK DYNO Shield is the premium STEK option — 8-mil with a nano-ceramic-infused top coat, 12-year warranty on clear film, and orange-peel-free optical clarity.
Hexis BODYFENCE X is our recommended all-round option — 8-mil with self-healing and stain-resistant properties, 10-year warranty, and outstanding UV performance in the UAE climate.
XPEL Ultimate Plus 10 is the flagship — a roughly 10-mil film about 25% thicker than standard PPF, with a fully transferable 10-year warranty. STEK and Hexis are stocked year-round; XPEL is subject to authorised supply.
Every film is sourced through manufacturer-authorised channels and registered for warranty at install.
It comes down to film construction, warranty terms, and transferability.
STEK FORCE Shield is the value option for owners planning around a five-year hold — hydrophobic, self-healing top coat with a 10-year clear-film warranty.
STEK DYNO Shield gives you the longest clear-film warranty (12 years) with a nano-ceramic top coat for best hydrophobic performance and orange-peel-free clarity.
Hexis BODYFENCE X is our recommended all-round pick — same 8-mil construction as STEK with self-healing, stain resistance, and strong UV performance for Dubai's climate.
XPEL Ultimate Plus 10 is the flagship — pick it if you want the thickest film, the strongest impact protection on high-strike panels (bonnet, bumper, fenders), and a warranty that transfers if you sell the car.
We'll walk you through the differences in person before you book.
The warranty depends on the film you choose.
STEK FORCE Shield is 10 years on clear film, 5 years on colour.
STEK DYNO Shield is 12 years on clear film, 10 years on colour.
Hexis BODYFENCE X carries a 10-year manufacturer warranty.
XPEL Ultimate Plus 10 carries a 10-year fully transferable warranty.
Every warranty covers yellowing, peeling, cracking and material defects, and each installation is registered directly with the manufacturer.
It depends on the film, the installation environment, and how the car is cared for.
Our flagship options — XPEL Ultimate Plus 10 at 10 years (transferable) and STEK DYNO Shield at 12 years — regularly last beyond their warranty windows with proper maintenance.
Heat, humidity and dust all shorten PPF lifespan, which is why we select films specifically engineered for Dubai's climate and install them in a controlled environment.
Paint Protection Film is one of the few services where what you pay for is almost entirely in the installation. The film itself is a small share of the final cost — the value is in surface preparation, a dust-free environment, precision cutting, and a technician who won't rush the job.
A cheap install on a premium film will still lift at the edges within a year.
We install STEK (FORCE Shield and DYNO Shield), Hexis BODYFENCE X, and XPEL Ultimate Plus 10 (when authorised supply allows), inside a dedicated climate-controlled PPF bay, and every install is registered with the manufacturer for warranty cover.
That's what you're paying for — the film, fitted properly, guaranteed in writing.
A full-body PPF installation typically takes 2 days to complete. This allows for proper surface preparation, precise application, and quality control to ensure a flawless finish.
Yes. Every full-body installation includes a 10-day return inspection — the car comes back to the bay so we can check every panel once the film has fully cured and bonded to the paint.
No — when professionally installed and removed, Paint Protection Film will not damage your paint.
In fact, it helps preserve the original factory finish underneath.
Absolutely. Ceramic coating can be applied over Paint Protection Film or vinyl wraps to enhance durability, hydrophobic properties, and long-term protection.
Stop by the workshop to see XPEL, STEK and Hexis side by side, and check the finish on a real car. No obligation.